Select one of the VMs in the list and you can change the network tied to that vmnic by clicking on the vmnic. Do that for each VM and each interface that needs to be tied to the new network. Once this is complete you can go ahead and move on to the typical steps taken for deploying the AutoLab. The second is to run the script below.
It also assumes that you followed the Fusion 5 Lab network setup instructions correctly. Import the OVF, give the vApp a unique name and select the required datastore and portgroups. To build the lab you will need to power on the VMs one at a time, you can safely ignore the warning that this is not the preferred way to handle vApps.
If you can deploy they multi-VM vApp then do, it is a lot less work. The VMs must not be run from this location as they won't perform well and the datastore will quickly run out of space.
AutoLab v1.1a released
If you have vCenter you can register each VM then migrate it to its proper datastore before you power it on. The copy takes quite a while as it appears not to respect the thin provisioned disks. The floppy images match the VM names, apart from vCloud which doesn't need a floppy. ESXi 5. Unless you have a lot of RAM 16GB plus in your lab host you are unlikely to be able to run everything at the same time. Download the licensed software In addition to the AutoLab kit, lab host, and its virtualization software you will need a few other pieces of software. Below is a list, evaluation versions are fine.
The older version components are only required if you plan to build an environment and then run the upgrade, i. VMware Tools windows. Build the Lab These steps use the full set of automation to build a complete lab environment.
The steps should be completed in order with each step completing before starting the next step. The build steps are the same irrespective of the outer virtualization platform, i.
- Penthouse Comix - Issue 21;
- PDF VSphere 5 AutoLab a Deployment Guide.
- Customer Reviews.
- PDF VSphere 5 AutoLab a Deployment Guide?
Workstation, ESXi or Fusion. You may choose not to use all of the vSphere build automation; I suggest you start with a complete fully automated build to make sure that all of the parts are in the right place. When you power on each VM you may be asked whether you moved or copied the VM. Router If you are using Windows Server evaluation for any of the VMs you will need the router VM running and with Internet access to allow Windows to activate at install time.
If you are building the lab on ESXi then you will need the router to allow access to the lab. Power on the Router VM, wait for it to boot to the logon prompt. Ping In the example above the external address is If you connect as a named user or connect using NFS, your user permissions will write the files in a way that renders them inaccessible.
Populate the build Share The build share is the central repository for the installers and scripts that are used inside the AutoLab, all of the software that will be used must be on this share before the rest of the builds begin. There are folders for each piece of software; most of these folders need to have the ISO files extracted into them.
The VIM folders need to have the vCenter installers extracted into them. Additional Components: The vCD folders should contain the vCloud director installer binary and vShield OVA as well as the Oracle installer rpm package, the vCloud install section below has links to download sources. Automation Control In the Automate folder on the build share you will find Automate.
Autolab Application Note COR02
None simply installs the VMTools. Base also installs SQLNative client and makes a couple of other convenient changes.
To minimize downloads you should only install VUM if you plan to use it. Adminpwd: Whatever is set here will be used as the password for all of the Windows accounts, in place of the default VMware1! BuildDatastores, BuildVM and ProductKey: These control how much the script to add hosts to the vCenter server will do, anything you want to do yourself you can turn off. For the initial test build I suggest having the automation fully build vSphere, datastores and VMs. This way you can be sure all the sources and setup steps work.
- Llama for Lunch.
- Ask a Question.
- PDF VSphere 5 AutoLab 1.1a Deployment Guide!
- Facebook Ate My Marriage.
- Acupressure: One Technique to Help Relieve & Prevent Sinus Pressure Buildup from Colds and Allergies.
- 15 Weird Facts You Dont Know About Florence (Deluxe Edition with Videos);
- AutoLab 2.0 vSphere Deployment Guide.
- General - eBooks.
- vSphere 5 AutoLab 1.1a Deployment Guide - eBook.
- AutoLab 2.0 vSphere Deployment Guide?
Subsequent rebuilds can be less automated to allow you to do tasks manually. Do not move on to Task 2 until the build share is fully populated and you are happy with the automation options in the automate. AutoLab build v1. Windows Serever R2 requres AutoLab build 2.
Also make sure that the right floppy image is connected, on Workstation and Fusion this is part of the package that you downloaded. On ESXi you may have to re-attach the floppies. Power on the DC VM to start the unattended install. The first time you boot this VM it has a blank hard disk, so it will boot from the Windows installer CD and begin the build process.
On subsequent reboots the installer will pass boot over to the hard disk unless you press a key. Pressing a key at this prompt will completely rebuild the VM with no confirmation.
vSphere 5 AutoLab a Deployment Guide - eBook - tuvirbrup.tk
This will take some time, go talk to your family for a while, or read some documentation to pass the time. On my laptop this takes around an hour. No input will be required from you through this process and you cannot start the other installs until it is complete. If these steps fail or does not start make sure your NAS VM is running and that you setup the Build share as outlined in task 1.
After the entire automated install completes the VM will reboot a final time, returning to the desktop as auto-logon is setup. At this point the Domain Controller is setup and ready. There is also a troubleshooting section at the end of this guide which may help you resolve any issues.
There is a script to test that the build has completed successfully, and that the Build share was correctly populated. Open the Validate script as administrator by right clicking on the Validate shortcut on the desktop and selecting Open as Administrator. As you would expect green is good, yellow is OK, red not so good. If the build share is not correctly populated then the DC VM will need rebuilding as most software installers come from the build share. The Validate script will also report any error or warning messages from the Windows eventlog.
It Is not unusual for there to be messages which can often be ignored. Once the Validate script completes with green you are ready for task 3.
A brief synopsis of the setup
If you plan to build as ESX 4. For each ESXi version there is a menu allowing the automated build of each ESXi host or a manual install from the network. The automated installs build with the standard IP addresses and no post build customization. The manual install behaves exactly as if you had booted from the ESXi installer ISO, asking you for all the required build information.
You can find the required information in the As Built section of this document. For the initial test build use the automated builds for the same ESXi version as your vCenter. If your desired ESXi version does not appear it is usually because the files were not correct on the build share.
Build the second server as required. This build will take another hour, leave it alone and do something else. During the VC build you may see a Windows Installer error , you can safely ignore this.